FERROFISH录音棚A32ProDante网络数字音频接口AD/DA转换器

使用微信扫描二维码分享朋友圈，成交更快更简单！

FERROFISH录音棚A32ProDante网络数字音频接口AD/DA转换器

为您提供录音技术支持和录音棚系统解决方案
联系人：武经理
电话：1八210951310
Q：2七2121253

Ferrofish A32 Pro Dante 录音棚数模转换器
64通道ESS AD/DA转换器
24-bit / 192 kHz采样
32x32 模拟输入和输出, D-Sub25 平衡(Tascam 格式)
64 Dante输入和输出通过双Ethernet socket with a redundancy function
平衡6.3 mm jack插孔立体声主输出with dedicated DAC监听路径
32x32 ADAT输入和输出通过 Toslink sockets with 96 kHz support
WordClock 输入和输出通过 BNC sockets with jitter reduction circuitry
MIDI 输入和输出通过 3.5 mm jack sockets
GPIO connector for unit monitoring and remote preset switching on D-Sub15
2个立体声耳机输出: 6.3 mm jack
Multitouch user interface on four TFT screens
Flexible routing matrix
Redundant power supply with a monitoring and alarm function
SHARC DS内部信号处理
Dual expansion slots for optional DSP sticks
远程控制通过RemoteFish App 应用(Mac & Windows)
Fanless construction
Model: 19" / 1U
技术参数：
Dante I/O
2 x RJ-45 Ethernet connector (CAT5/6 cables),
64 x 64 channel Brooklyn series board built-in.
MADI I/O (AES10)
双SFP插槽MADI:多模或单模SFP模块作为默认配置，可选第二SFP模块可选
64通道@32kHz, 44.1kHz, 48kHz
32通道@64kHz, 88.2kHz, 96kHz
32通道@128kHz, 176.4kHz, 192kHz*
*两个MADI端口均用于实现全32+32通道传输
MIDI对MADI的支持。
延迟:3 samples
冗余:信号丢失时，自动切换光纤<->同轴MADI
模拟输入(AD)
ESS Tech新一代的模拟/数字转换器。
4 x DSub25 (Tascam格式)
数字增益:+20dBu…- 8dbu, 1dB步进
放大器：OPA1604 / OPA1664
电平显示器：TFT显示屏，28级
模拟输出 (DA)
新一代的ESS Tech模拟/数字转换器
4 x DSub25 (Tascam format)
数字增益: +20dBu … -8dBu, 1dB steps
OpAmps：OPA1604 / OPA1664
电平指示：TFT screen, 28 levels
耳机输出：
2 x¼”(6.3毫米)立体声TRS插孔，带有HQ放大器部分和DAC路径。
提供立立体声通道。
可选择单声道/立体声或M/S解码源的所有输入和输出。
数字控制音量电平
ADAT I/O
4+4 optical 光纤接口 (8 channels each with 48 kHz)
32 channels @32kHz, 44.1kHz, 48kHz
16 channels @64kHz, 88.2kHz, 96kHz
n/a @128kHz, 176.4kHz, 192kHz
Latency: 3 samples
GPIO Port
4x通用开关预置1-4输入。
4x通用输出，用于监控锁/电源/MADI/Temp警报。
MIDI I/O
2 x 1/8″ (3.5mm) TRS连接器用于远程控制
Conversion MIDI <> MIDI-over-MADI possible
MIDI 2.0 pinout
Wordclock I/O
BNC: 1 x 输入， 1 x 输出
75 Ohm Termination switchable for input
电源供电：
12V, 3A
2 ×输入插孔，带有螺丝锁，用于冗余电源。
电压监控，电源输入故障时屏幕显示警告信息
内部复位polyfuse
包括1 ×电源，第二个电源模块可选
USB Port：1 x USB 2.0 for Remote/Updates
附加功能
192kHz操作(S/MUX高达192kHz)。
GPIO远程预设切换和告警端口
DSP Plugin-ready
带有可切换滤波器的A/D和D/A转换器
双耳机输出，方便监听
MIDI over MADI预置管理
广泛的路由/混合的可能性。
冗余(MADI I/O, Dante I/O，电源)。
内部时钟
温度补偿振荡器，精度高。
初始精度:+ / - -1.5 ppm
超温范围:+/-2.5ppm
老化:+ / 1 ppm
PLL
数字控制锁相环/抖动减少系统
输出抖动:50ps…100ps典型
液晶显示器
4 × TFT多触屏用户界面
两层照明触摸敏感高分辨率编码器
高度直观的控制单元
音频处理器核心
SHARC ADSP-2148x series DSP
所有384个音频通道的路由和处理。
源耳机输出。
计算即将到来的音频处理算法
尺寸：
1RU, 无风扇设计
深度: 31cm (12.6”) (包括连接器)
重量：4.1kg (9 lbs)
环境温度：41°F up to 113°F (+5°C up to +45°C)
Ferrofish A32 Pro Dante Multi-format Converter Features:
386-channel multi-format AD/DA, ADAT, MADI, and Dante converter
32 channels of balanced analog I/O in D-sub format, with levels up to +20dBu, adjustable in 1dB steps
32 channels of optical ADAT I/O at up to 96kHz
ADAT can be switched to S/PDIF with built-in sample rate conversion
64 channels of MADI over either an optical or a coaxial connection
64 channels of Dante over dual RJ-45 ports
Word clock I/O keeps your entire digital system in perfect synchronization
MIDI I/O and MIDI-over-MADI for embedding signals and remote control
Headphone output with integrated monitoring matrix for mono, stereo, and sub-mix signals
Low-latency Cirrus Logic technology ensures rock-solid clocking, superior jitter reduction, and ultra-detailed sound
SHARC DSP with floating-point calculation and 80-bit-wide accumulator processes on all channels
Sophisticated routing and mixing of all channels
Intuitive one-knob control operating system and multilingual self-explaining, always-on help system
Time-saving preset management
4 TFT screens yield a detailed, at-a-glance overview of settings and levels
Redundant power outputs supply extra peace of mind
Tech Specs
Type: Multi-format Converter
Computer Connectivity: USB 2.0
Form Factor: Rackmount
Analog Inputs: 4 x DB-25
Analog Outputs: 4 x DB-25, 2 x 1/4" TS
Digital Inputs: 4 x Optical Toslink (ADAT)
Digital Outputs: 4 x Optical Toslink (ADAT)
Headphones: 2 x 1/4" TRS
MIDI I/O: In/Out, 1/8"
USB: 1 x Type B
Data I/O: 2 x RJ45 (Dante), 2 x Optical Toslink (MADI)
Network: Dante, ADAT, MADI
Clock I/O: 2 x BNC
Other I/O: 1 x GPIO, 2 x DSP Stick
Rack Spaces: 1U
Power Supply: 12V DC power supply (included)
Height: 1.75"
Width: 19"
Depth: 10.6"
Weight: 9 lbs.
4 x 4 D-Sub25
8 analog channels on each D-Sub25
TASCAM pin-format, max 192kHz
Gain/Levels: -8dBu…+20 dBu (1dB steps).
MADI I/O: Dual SFP Slots
The two SFP slots allow a variety of configurations:
From a single module configuration to redundant
dual SFP Modes (Single-/Multimode or Coaxial) –
everything is possible.
USB Type-B
For firmware updates, plugin installation and remote control from a host computer. The A32pro Dante appears as a MIDI device.
4 x 4 ADAT TOSLINK
Each ADAT port transfers eight channels at a sample rate of 48kHz (= 32 In + 32 Out). A SMUX/2 mode up to 96k is also possible.
Dante Network I/O (redundant)
Two RJ-45 ports connect to any Dante audio network. Simply connect a LAN Ethernet cable (CAT5/CAT6) to the primary port. The secondary port takes automatically over in case of a network error (Dante Port Redundancy).
2x PHONES STEREO TRS (FRONT)
Monitoring of every stereo/mono or even M/S (Mid/Side) I/O channel by an dedicated DAC path.
Word Clock I/O
BNC with 75 Ohm
internal termination.
On/Off via display.
MIDI I/O
Dual 1/8″ (3.5mm) TRS I/O
(MIDI 2.0 layout)
for remote Control and
MIDI-over-MADI
Redundant Power Supply
Ground-loop free, coaxial DC connector with secure, stable and relaible screw-lock. One PSU is included.